下表展示的是台站 / 对象 IQ2CY-10 在数据库中保存的最新遥测报文。如果未显示任何数据，则说明在最近 10 天内未接收到任何遥测报文。
遥测报文通常用于上报诸如中继参数、电池电压、辐射强度等各类测量值（以及其他自定义测量）。
| 时间 | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1764923300 | 17 Pkt/10m | 0 Pkt/10m | 4 Volt | 0.7 Volt | -1.27 Ampere |
| 1764922697 | 20 Pkt/10m | 0 Pkt/10m | 4 Volt | 0.7 Volt | -1.27 Ampere |
| 1764922094 | 8 Pkt/10m | 1 Pkt/10m | 4.04 Volt | 0.7 Volt | -1.27 Ampere |
| 1764921491 | 19 Pkt/10m | 2 Pkt/10m | 4.02 Volt | 0.7 Volt | -1.27 Ampere |
| 1764920887 | 16 Pkt/10m | 1 Pkt/10m | 4.04 Volt | 0.7 Volt | -1.27 Ampere |
| 1764920284 | 19 Pkt/10m | 2 Pkt/10m | 4 Volt | 0.6 Volt | -1.27 Ampere |
| 1764919673 | 9 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.7 Volt | -1.27 Ampere |
| 1764919070 | 15 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.7 Volt | -1.27 Ampere |
| 1764918467 | 13 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.7 Volt | -1.27 Ampere |
| 1764917864 | 22 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.7 Volt | -1.27 Ampere |
| 1764917261 | 9 Pkt/10m | 1 Pkt/10m | 3.96 Volt | 0.7 Volt | -1.27 Ampere |
| 1764916657 | 24 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.7 Volt | -1.27 Ampere |
| 1764916054 | 15 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 0.7 Volt | -1.27 Ampere |
| 1764915451 | 11 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 0.7 Volt | -1.27 Ampere |
| 1764914848 | 12 Pkt/10m | 0 Pkt/10m | 3.92 Volt | 0.7 Volt | -1.27 Ampere |
| 1764914245 | 12 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 0.7 Volt | -1.27 Ampere |
| 1764913641 | 11 Pkt/10m | 1 Pkt/10m | 4 Volt | 0.7 Volt | -1.27 Ampere |
| 1764913038 | 13 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 0.7 Volt | -1.27 Ampere |
| 1764912435 | 15 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.7 Volt | -1.27 Ampere |
| 1764911832 | 12 Pkt/10m | 1 Pkt/10m | 4 Volt | 0.7 Volt | -1.27 Ampere |
| 1764911228 | 9 Pkt/10m | 2 Pkt/10m | 3.98 Volt | 0.7 Volt | -1.27 Ampere |
| 1764910625 | 21 Pkt/10m | 1 Pkt/10m | 3.98 Volt | 0.7 Volt | -1.27 Ampere |
| 1764910022 | 15 Pkt/10m | 1 Pkt/10m | 4.08 Volt | 0.7 Volt | -1.27 Ampere |
| 1764909419 | 13 Pkt/10m | 0 Pkt/10m | 4 Volt | 0.7 Volt | -1.27 Ampere |
| 1764908815 | 19 Pkt/10m | 1 Pkt/10m | 4.04 Volt | 0.7 Volt | -1.27 Ampere |
*使用的公式系数：
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)