下表展示的是台站 / 对象 DO1TNP 在数据库中保存的最新遥测报文。如果未显示任何数据，则说明在最近 10 天内未接收到任何遥测报文。
遥测报文通常用于上报诸如中继参数、电池电压、辐射强度等各类测量值（以及其他自定义测量）。
| 时间 | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764910190 | 393 | 0 | 0 | 0 | 0 |
| 1764905676 | 397 | 0 | 0 | 0 | 0 |
| 1764901162 | 401 | 0 | 0 | 0 | 0 |
| 1764896648 | 404 | 0 | 0 | 0 | 0 |
| 1764892134 | 405 | 0 | 0 | 0 | 0 |
| 1764887620 | 405 | 0 | 0 | 0 | 0 |
| 1764883106 | 407 | 0 | 0 | 0 | 0 |
| 1764878592 | 414 | 0 | 0 | 0 | 0 |
| 1764875603 | 414 | 0 | 0 | 0 | 0 |
| 1764874487 | 414 | 0 | 0 | 0 | 0 |
| 1764873735 | 414 | 0 | 0 | 0 | 0 |
| 1764871435 | 414 | 0 | 0 | 0 | 0 |
| 1764867965 | 414 | 0 | 0 | 0 | 0 |
| 1764867233 | 414 | 0 | 0 | 0 | 0 |
| 1764864285 | 414 | 0 | 0 | 0 | 0 |
| 1764864090 | 414 | 0 | 0 | 0 | 0 |
| 1764863135 | 414 | 0 | 0 | 0 | 0 |
| 1764862378 | 414 | 0 | 0 | 0 | 0 |
| 1764858744 | 414 | 0 | 0 | 0 | 0 |
| 1764856992 | 414 | 0 | 0 | 0 | 0 |
| 1764855225 | 414 | 0 | 0 | 0 | 0 |
| 1764852452 | 414 | 0 | 0 | 0 | 0 |
| 1764849696 | 414 | 0 | 0 | 0 | 0 |
| 1764846556 | 414 | 0 | 0 | 0 | 0 |
| 1764840807 | 415 | 0 | 0 | 0 | 0 |
*使用的公式系数：
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)