下表展示的是台站 / 对象 BG2VZP-13 在数据库中保存的最新遥测报文。如果未显示任何数据，则说明在最近 10 天内未接收到任何遥测报文。
遥测报文通常用于上报诸如中继参数、电池电压、辐射强度等各类测量值（以及其他自定义测量）。
| 时间 | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764912204 | 7 | 211 | 1012 | 1149 | 0 |
| 1764909109 | 8 | 216 | 1013 | 1149 | 0 |
| 1764906013 | 8 | 219 | 1014 | 1149 | 0 |
| 1764902958 | 9 | 214 | 1015 | 1149 | 0 |
| 1764899869 | 8 | 178 | 1015 | 1152 | 0 |
| 1764896788 | 9 | 150 | 1016 | 1149 | 0 |
| 1764893695 | 9 | 133 | 1016 | 1149 | 0 |
| 1764890615 | 8 | 115 | 1016 | 1146 | 0 |
| 1764887557 | 8 | 113 | 1016 | 1149 | 0 |
| 1764884496 | 7 | 108 | 1016 | 1149 | 0 |
| 1764881451 | 8 | 117 | 1017 | 1149 | 0 |
| 1764878411 | 9 | 115 | 1017 | 1152 | 0 |
| 1764875370 | 10 | 112 | 1018 | 1149 | 0 |
| 1764872333 | 10 | 111 | 1018 | 1152 | 0 |
| 1764869295 | 10 | 109 | 1018 | 1152 | 0 |
| 1764866263 | 10 | 108 | 1018 | 1146 | 0 |
| 1764863223 | 10 | 109 | 1018 | 1149 | 0 |
| 1764860178 | 12 | 112 | 1018 | 1152 | 0 |
| 1764857139 | 9 | 114 | 1018 | 1149 | 0 |
| 1764851077 | 7 | 110 | 1016 | 1149 | 0 |
| 1764838934 | 6 | 109 | 1015 | 1146 | 0 |
| 1764835862 | 8 | 106 | 1014 | 1149 | 0 |
*使用的公式系数：
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)