下表展示的是台站 / 对象 OK2ILA-9 在数据库中保存的最新遥测报文。如果未显示任何数据，则说明在最近 10 天内未接收到任何遥测报文。
遥测报文通常用于上报诸如中继参数、电池电压、辐射强度等各类测量值（以及其他自定义测量）。
| 时间 | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764855628 | 7.7 C | 8130 | 0 | 0 | 0 |
| 1764854725 | 7.9 C | 8127 | 0 | 0 | 0 |
| 1764852919 | 8.8 C | 8109 | 0 | 0 | 0 |
| 1764852017 | 9.4 C | 8106 | 0 | 0 | 0 |
| 1764851855 | 9.6 C | 8084 | 0 | 0 | 0 |
| 1764851676 | 9.2 C | 8134 | 0 | 0 | 0 |
| 1764851610 | 9 C | 8131 | 0 | 0 | 0 |
| 1764851573 | 9 C | 8142 | 0 | 0 | 0 |
| 1764851558 | 8.7 C | 8122 | 0 | 0 | 0 |
| 1764851543 | 8.7 C | 8114 | 0 | 0 | 0 |
| 1764851532 | 8.7 C | 8105 | 0 | 0 | 0 |
| 1764851518 | 8.7 C | 8100 | 0 | 0 | 0 |
| 1764851503 | 8.6 C | 8097 | 0 | 0 | 0 |
| 1764850918 | 7.9 C | 8108 | 0 | 0 | 0 |
| 1764850899 | 7.9 C | 8105 | 0 | 0 | 0 |
| 1764850884 | 7.8 C | 8102 | 0 | 0 | 0 |
| 1764850868 | 7.8 C | 8100 | 0 | 0 | 0 |
| 1764850850 | 7.8 C | 8101 | 0 | 0 | 0 |
| 1764850669 | 7.7 C | 8099 | 0 | 0 | 0 |
| 1764850535 | 6.8 C | 8143 | 0 | 0 | 0 |
| 1764850287 | 6.3 C | 8187 | 0 | 0 | 0 |
| 1764850235 | 6.3 C | 8105 | 0 | 0 | 0 |
| 1764849951 | 6.2 C | 7867 | 0 | 0 | 0 |
| 1764849766 | 7.1 C | 8091 | 0 | 0 | 0 |
| 1764849731 | 6.9 C | 8073 | 0 | 0 | 0 |
*使用的公式系数：
Value1: 0, 0.1, -50
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)