下表展示的是台站 / 对象 YC0TBU-11 在数据库中保存的最新遥测报文。如果未显示任何数据，则说明在最近 10 天内未接收到任何遥测报文。
遥测报文通常用于上报诸如中继参数、电池电压、辐射强度等各类测量值（以及其他自定义测量）。
| 时间 | HDOP* | SAT* | TEMP* | HUMID* | PRESSURE* |
|---|---|---|---|---|---|
| 1764912197 | 1 DOP | 7 SAT | 38 °C | 38 % | 1000 mBar |
| 1764911297 | 1 DOP | 7 SAT | 38 °C | 37 % | 1000 mBar |
| 1764910397 | 2 DOP | 5 SAT | 38 °C | 37 % | 1000 mBar |
| 1764909497 | 1 DOP | 6 SAT | 38 °C | 38 % | 1001 mBar |
| 1764908597 | 1 DOP | 6 SAT | 38 °C | 38 % | 1001 mBar |
| 1764907696 | 3 DOP | 5 SAT | 38 °C | 38 % | 1001 mBar |
| 1764906797 | 2 DOP | 5 SAT | 38 °C | 38 % | 1001 mBar |
| 1764905896 | 3 DOP | 4 SAT | 38 °C | 38 % | 1001 mBar |
| 1764904997 | 2 DOP | 5 SAT | 38 °C | 38 % | 1002 mBar |
| 1764904097 | 2 DOP | 5 SAT | 38 °C | 38 % | 1002 mBar |
| 1764903199 | 99 DOP | 0 SAT | 38 °C | 38 % | 1002 mBar |
| 1764902296 | 99 DOP | 0 SAT | 38 °C | 38 % | 1002 mBar |
| 1764901397 | 99 DOP | 0 SAT | 38 °C | 38 % | 1002 mBar |
| 1764900497 | 99 DOP | 0 SAT | 37 °C | 38 % | 1003 mBar |
| 1764899596 | 99 DOP | 0 SAT | 37 °C | 38 % | 1003 mBar |
| 1764898696 | 99 DOP | 0 SAT | 37 °C | 39 % | 1003 mBar |
| 1764897796 | 99 DOP | 0 SAT | 37 °C | 39 % | 1003 mBar |
| 1764896896 | 99 DOP | 0 SAT | 37 °C | 39 % | 1003 mBar |
| 1764895996 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764895097 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764894197 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764893296 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764892396 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764891497 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
| 1764890597 | 99 DOP | 0 SAT | 37 °C | 39 % | 1002 mBar |
*使用的公式系数：
HDOP: 0, 1, 0
SAT: 0, 1, 0
TEMP: 0, 1, 0
HUMID: 0, 1, 0
PRESSURE: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)